NEW & REMANUFACTURED EDELBROCK CARBURETORS
CALIBRATED FOR FUEL ECONOMY
600 cfm, Street Legal, Electric Choke
50-state street legal for all 1980 and earlier
General Motors V8s (E.O. #D-215-10). Calibrated for maximum fuel economy.
Includes timed vacuum ports, EGR and fuel vapor outlet. Not for
computer-controlled engines. Comes with the following jets, rods and springs:
Metering Jets - Primary .098, Secondary .095; Metering Rods - .073 x .047;
Step-Up Spring - orange (5" Hg).
Edelbrock
#1400
New Shown below:
600 cfm, square-flange,
electric choke, (EGR)
Please Select Edelbrock model:
CALIBRATED FOR PERFORMANCE
500 cfm, Electric Choke
Designed and calibrated for small cubic-inch
engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford
and dual-quad applications such as Edelbrock C-26, F-28 and Street Tunnel Ram.
Match with an Edelbrock Performer or Performer EPS manifold and other brands of
similar design. Includes both timed and full vacuum ports for ignition advance.
Comes with: Metering Jets - Primary .086, Secondary .095; Metering Rods - .065
x .052; Step-Up
Spring - orange.
500 cfm, square-flange,
electric choke, (EGR)
Edelbrock
#1403
New Shown below:
CALIBRATED FOR PERFORMANCE
500 cfm, Manual Choke
Designed and calibrated for small cubic-inch
engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford
and dual-quad applications such as Edelbrock C-26, F-28 and Street Tunnel Ram.
Match with an Edelbrock Performer or Performer EPS manifold and other brands of
similar design. Includes both timed and full vacuum ports for ignition advance.
Comes with: Metering Jets - Primary .086, Secondary .095; Metering Rods - .065
x .052;
Step-Up Spring.
500 cfm, square-flange, manual choke (non-EGR)
Edelbrock
#1404
New Shown below:
CALIBRATED FOR PERFORMANCE
600 cfm, Manual Choke
Designed and calibrated for optimum street
performance in small-block and some big-block engines. Match with a variety of manifolds
that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker
II and other brands of similar design. Includes both timed and full vacuum ports
for ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering
Jets – Primary .100, Secondary .095; Metering Rods – .070 x .047; Step-Up Spring.
600 cfm, square-flange,
manual choke, (EGR)
Edelbrock
#1405
New Shown below:
ADD TO CART:
WWW.HIGHPERFORMANCECARBURETORS.COM
New Edelbrock:
$339.95
Remanufactured:
Out of Stock
Have your carburetor rebuilt for:
$149.95
New Edelbrock:
$329.95
Remanufactured:
Out of Stock
Have your carburetor rebuilt for
$149.95
New Edelbrock:
$289.95
Remanufactured:
Out of Stock
Have your carburetor rebuilt for
$149.95
New Edelbrock:
$289.95
Remanufactured:
$179.95
Have your carburetor rebuilt for:
$149.95