CALIBRATED FOR FUEL ECONOMY
750 cfm, Electric Choke
Designed for small-block and small displacement
big-block engines, these carbs are recommended only for stock to Performer
level applications. They are not recommended for use on RPM or Torker II intake
manifolds. Match with an Edelbrock Performer or Performer EPS manifold and
other brands of similar design. Calibrated 2% leaner than #1405. Includes both
timed and full vacuum ports for ignition advance. Comes with: Metering Jets -
Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring -
yellow (4" Hg).
Edelbrock
#1411
Shown below:
750 cfm, square-flange,
electric choke (non-EGR)
CALIBRATED FOR PERFORMANCE
800 cfm, Manual Choke
Designed and calibrated for optimum street
performance in small-block and big-block engines with Performer RPM, RPM
Air-Gap and Torker II manifolds and with Performer manifolds on large
cubic-inch engines. Includes both timed and full vacuum ports for ignition
advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets
- Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring -
orange (5" Hg).
800 cfm, square-flange,
manual choke (non-EGR)
Edelbrock
#1412
Shown below:
CALIBRATED FOR MARINE
800 cfm, Electric Choke, non-EGR
Designed and calibrated for optimum marine
performance in small-block V8 engines with a variety of manifolds that include
Edelbrock Performer, Performer RPM, RPM Air-Gap, Torker II and other brands of
similar design. Also ideal for Chevy 4.3L V6 engines with a Performer manifold
(see Manifolds) and Calibration Kit #1485. Comes with: Metering Jets - Primary
.098, Secondary .101; Metering Rods - .068 x .047; Step-Up Spring - orange (5"
Hg).
800 cfm, square-flange, electric choke, marine
Edelbrock
#1413
Shown below:
Copyright 2006©
HighPerformanceCarburetors.com
A Division of National Carburetors, Inc. All
rights reserved.
Edelbrock® is a registered trademark of Edelbrock
Corporation.