CALIBRATED FOR FUEL ECONOMY
600 cfm, Electric Choke
Designed for small-block and small displacement
big-block engines, these carbs are recommended only for stock to Performer
level applications. They are not recommended for use on RPM or Torker II intake
manifolds. Match with an Edelbrock Performer or Performer EPS manifold and
other brands of similar design. Calibrated 2% leaner than #1405. Includes both
timed and full vacuum ports for ignition advance. Comes with: Metering Jets -
Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring -
yellow (4" Hg).
Edelbrock
#1406
Shown below:
600 cfm, square-flange,
electric choke (non-EGR)
Please Select Edelbrock model:
ADD TO CART:
CALIBRATED FOR PERFORMANCE
750 cfm, Manual Choke
Designed and calibrated for optimum street
performance in small-block and big-block engines with Performer RPM, RPM
Air-Gap and Torker II manifolds and with Performer manifolds on large
cubic-inch engines. Includes both timed and full vacuum ports for ignition
advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets
- Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring -
orange (5" Hg).
750 cfm, square-flange, manual choke (non-EGR)
Edelbrock
#1407
Shown below:
CALIBRATED FOR MARINE
600 cfm, Electric Choke, Non-EGR
Designed and calibrated for optimum marine
performance in small-block V8 engines with a variety of manifolds that include
Edelbrock Performer, Performer RPM, RPM Air-Gap, Torker II and other brands of
similar design. Also ideal for Chevy 4.3L V6 engines with a Performer manifold
(see Manifolds) and Calibration Kit #1485. Comes with: Metering Jets - Primary
.098, Secondary .101; Metering Rods - .068 x .047; Step-Up Spring - orange
(5" Hg).
600 cfm, square-flange,
electric choke, marine
Edelbrock
#1409
Shown below:
CALIBRATED FOR MARINE
750 cfm, Electric Choke
Designed and calibrated for optimum marine
performance in small-block and big-block V8 engines with Performer RPM, RPM
Air-Gap and Torker II manifolds and with Performer manifolds on large
cubic-inch engines. Comes with: Metering Jets - Primary .113, Secondary .107;
Metering Rods - .071 x .047; Step-Up Spring - orange (5" Hg).
750 cfm, square-flange, electric choke, (EGR)
Edelbrock
#1410
Shown below:
Copyright 2006©
HighPerformanceCarburetors.com
A Division of National Carburetors, Inc. All
rights reserved.
Edelbrock® is a registered trademark of Edelbrock
Corporation.